Can excessive water pressure cause damage to your home

The majority of people don’t think much about water pressure. Those who do most likely have experienced low water pressure, which makes it challenging to take a shower and perform other home activities. While having high water pressure might be beneficial, going beyond the acceptable Australian Standard of 500 kPa can result in harm. In particular, if your house is in Perth Hills, where the pressure is significantly higher. However, don’t worry!

We have blog pages that explain the symptoms of high water pressure, what it implies for your home, and some related situations from the past. You’ll be aware of the procedure we use to assess your pressure and determine whether it has damaged anything with assistance for hot water repairs in Melbourne, and other plumbing services in Melbourne.

Knowledge of High Water Pressure

Water pressure, which is measured in kilopascals (kPa) or PSI, is the force of the water flow in your pipes (pounds per inch). The type of water flow coming from your faucets is determined by this pressure, also known as force. Your tap, toilets, and shower will not function properly if the pressure is too low.

Municipalities must offer 500 kPa of water pressure for homes in order for them to comply with Australian Standards. However, the water pressure is much higher, often between 800 and 1,000 kPa, and may thus be utilised for fire hydrants, multi-story structures, and cluster housing where there are a lot of dwellings.

To distribute water to residential buildings, plumbers construct smaller diameter piping after connecting to the water mains through a communication line. This helps to ensure that your water pressure stays below the permitted 500 kPa level. But beware—even when the pressure is set to normal, it frequently rises at night since fewer people are using the water nearby. This explains why leaks frequently occur at night. Thermal expansion that occurs when water is heated can also result in high water pressure.

Excessive water pressure warning signs

While low water pressure is immediately apparent, excessive water pressure can be harder to find, Check with signs or hire plumbing services in Melbourne:

• Leaking faucet: Strong water pressure can cause a faucet to leak. If this occurs only seldom or when using another fixture, high water pressure may be the cause. Water hammers can be caused by high water pressure. These “hammers” allude to the hammering noise made when water shockwaves abruptly come to a stop.
• Rattling pipes: If the pipes move about while delivering water, the water pressure may be too high.
• High water bills are caused by high water pressure, which uses more water and increases costs.
• Other indications include increased plumbing noise, frequently running toilets, and water bursts when turning on a faucet.

Excessive water pressure damage

Your plumbing system, among other things, is adversely affected by high water pressure in a number of ways. The plumbing system may first squander your water supply, perhaps increasing your costs by 30%.

Second, water-using appliances are susceptible to serious damage. Washing machines and dishwashers often operate with little water pressure. Excessive water pressure can hasten breakdown and result in high repair costs. Regular plumbing inspection services with plumbing services in Melbourne will help you simply prevent these problems.

Finally, pipelines, especially older ones, can suffer significant damage from high water pressure. Your pipes may fracture and break more frequently as a result. Water leaks might ultimately result in waste and harm.

Taking Action to Reduce High Water Pressure

Your home’s water pressure needs to remain within the ideal operating range. Velaqua Plumbing will put up a valve at the water metre to regulate the pressure if it is too high. Additionally, pressure limiting valves will guarantee that the municipal water supply’s pressure is decreased in accordance with the rules. To safeguard the whole supply line into the house and garden, a PLV should be installed at the water metre. According to the requirements, any valves that restrict or lower pressure must be installed in a position that makes it simple to maintain or replace the valve if it becomes worn out.

Plumbers in Melbourne that are certified and registered will be aware of the Standards’ requirements. They will also be aware that pressure-relieving equipment cannot be buried underground and that freezing hazards during the winter must be avoided.

Remember to check plumbing services in Melbourne for licenses in accordance with the Plumbers Licensing and Plumbing Standards while searching for plumbing services in Melbourne. Because of our team’s ongoing training and licensing, Velaqua Plumbing, the best plumbing services in Melbourne is able to keep up with the ever evolving field of technology.