Are Your Pipes Knocking? Here’s Why

Let’s get right to it: pounding pipes or knocking pipes do not always indicate danger. However, ignoring them can undoubtedly lead to issues. And, at first, knocking pipes are easy to dismiss, and there is no need to call local plumber in port Melbourne. Sure, it’s a little startling at first, but it’s not that loud, and it’s simple to grow used to. However, please do not become accustomed to it! It may result in plumbing issues, which is the last thing any homeowner wants. Continue reading to find out more!

First, what causes pipe knocking?

Most banging pipes are caused by a change in water pressure inside the main water line flowing into your home–this is known as water hammer. This may seem unpleasant, but pressure is a crucial aspect of keeping your plumbing system working well, allowing water to flow smoothly between pipes and through faucets and fixtures.

When compressed air leaks, water flows abruptly and forcefully, causing the knocking sound you hear as it travels along the length of your main water line.

Another cause of knocking pipes is high water pressure in the main supply, which rises at night when water usage is at its lowest. This could cause bursts if the correct valves are not installed on your water metre. To protect your home from flooding, call Velaqua Plumbing.

So, what are your options?

• Notify your home that the water will be turned off for a short time, then locate and turn off your main water cutoff.
• Next, flush all of your water lines by opening all of your faucets and flushing your toilet. Water can still depart your property through your drainage pipes and sewer system with the main supply cutoff closed, guaranteeing that your plumbing pipes are empty.
• After you’ve emptied out all the water, cautiously reopen the main valve. Before water can flow freely through your pipes again, the air chambers between and surrounding them must be refilled.
• After you’ve done all of this, the knocking should stop!
• If the problem still persists call your local plumber in port Melbourne

How Can I Repair My Knocking Water Pipes?

Knocking pipes are frequently caused by loose elbows or valves that aren’t entirely open or closed around your property. Because of air pockets between them, the base of the pipe may vibrate against another surface in some cases. If none of these solutions work, you may need to have new plumbing done. Fortunately, most of these issues may be resolved without the need for a plumber.

Examine Your Valves

Check that all valves and faucets are fully open if the hammering sound is coming from a water supply pipe. If this doesn’t work, try increasing the water pressure in your home by changing the main valve to your property. This frequently eliminates excessive bubbling or gurgling noises between air chambers caused by low water flow rates.

In certain circumstances, you may need to repair worn-out pipes situated on outside walls that are subjected to extreme temperature fluctuations throughout the year. Check for loose valves or elbow fittings and tighten them back down or totally replace them if you hear clanging sounds anytime water starts running through a pipe anywhere in your home. Water hammer noises can be reduced by painting over existing rust patches on interior pipes.

Examine Your Water Heater

The most typical cause of strange pounding noises when there is no water running is sediment accumulation in your water heater. It might be loud enough that the echoes travel and make the pounding sound appear to come from the pipes in the wall.

The noise is caused by steam bubbles emerging from the sediment that has collected at the bottom of the water heater tank. When you boil water in a covered pot on the stove, it begins to push up against the lid. If the water isn’t running, flushing your water heater might assist.

Need Professional Plumbers to Inspect Your Plumbing Pipes?

If you do all of this and the banging stops, with no other strange side effects or symptoms, you may not need to call a local plumber in port Melbourne. However, disregarding a water hammer for an extended period of time might cause plumbing joints to become loose or leaks in the pipes. Keep an eye and an ear out for symptoms of a leak, such as:

• The sound of running water when none of the fixtures are turned on.
• A slab leak is indicated by warm areas on the floor.
• When no fixtures are turned on, the water metre runs.
• Water damage that is visible.

Additionally, if you want to permanently get rid of that knocking sound? Call Velaqua Plumbing at 0402417328 for an expert local plumber in port Melbourne. We have trained plumbers ready to restore your home’s plumbing system to its original state.

Finally, if you have any concerns concerning the information we provided above, please contact one of our plumbers. We are delighted to assist!